We've been getting a lot of questions about our upgrades to our 2023 Roadtrek Play. I thought that I would just post some of the things that we're done to improve functionality for us....hopefully, some of this information will be helpful to others as well. The posts are divided into 5 parts....
Upgrade Posts List:
These are the upgrades in this post (Part 1):
- Bed Coverings
- Bask-a-Table
- Aisle Upper Storage Shelf
- Cup Holders (for table)
- Rear Corner Storage mini Buckets
Sleeping configurations in our Play can be used as two north-south twin beds, or as a king bed by using boards and bolsters which fit between the twin beds. We use the twin beds....they are more than adequate for us size-wise (they are each 39" wide by 75" long). They allow us to independently make bathroom trips without awakening the other, and also keep the aisle open for a more spacious feel. So....the bolsters that were to be used to make the king bed are stored at home, and we use 6 queen sized pillows and a couple of 18" x 18" throw pillows for backrests and sleeping.
We upgraded our bedding by using a couple of daybed covers purchased from Amazon. They each came with three queen size pillow shams and a decorative pillow. By placing the covers backwards (elastic fitted edge in front) there's about a 24" length of the fabric under the mattress on the wall side which keeps it in place.
We sleep directly on the daybed covers. They have a brushed (almost flannel-like finish) and they po off quickly to wash.
We each have a Lightweight Sherpa Plush Blanket Twin Size. For storage, they roll up and fit onto an extra pillow sham.
We have a couple of baskets that we keep in the aisle. I purchased them several years ago for another RV, and happily discovered that they fit perfectly in between the beds. Here's the link for the ones I bought (they were not quite so much then). Note that there are a couple of sizes at this link, and ONLY the 15" wide one fits between the Play beds. You may be able to find a similar basket that will fit between your beds. 
One of the baskets sits on the floor, and we use it to store our electric shore line, our EMS Surge Protector, and our water hose. The second basket sits on one of the boards which was originally to be used to make the king bed. That gives us a sturdy base and we use that basket to store our photo gear and laptops while traveling. Because the baskets wedge securely between the mattresses, it's very secure.
One of our most recent upgrades utilizing these baskets was the addition of our "Bask-a-Table." 🤣🤣🤣
The Play comes with a pole that mounts in a floor bracket and which holds a table top that snaps onto the pole. After using it for a year, we felt like the table was always an issue for us....it was a bit wobbly, even when secured tightly.
At some point we stopped using the pole and just started placing the original table top one the upper basket for meals, and also as a night table. After realizing that this was a better table solution for us, we constructed our "Bask-a-table" which we both like as an alternative to the original table.
While we can't place our legs under the table completely, we didn't feel it necessary since we usually sit at the end of the table or sit sideways against the cushions. I don't think it would be too difficult to come up with a way to raise the height of the table.
Gracie is sitting in about the same position that we like.
The table itself is constructed of 3/4" pine, which we stained and sealed to match our interior. We glued 1" shims underneath the top extending into the basket to keep the table secure. Because of our placement, the tabletop fits snuggly into the basket, yet easily lifts out for access to our gear.
The cup holders in this pic are from Amazon as well. They use a washable sticky pad to secure the holders to the table.....love them!
Then we glued a 1" lip on the front of the shelf. The cabinet doors prevent the shelf from sliding forward.
One last storage feature for this post....
These little Hanging Buckets from Amazon make easy access for charging cables, TV controls, and our heated mattress controls. They fit snugly in the slots in the rear van corners. To place them, you need to pull the clip on the back of the cup out a bit and slide one corner into the slot...then the other side will slip in.
 |
| Our heated mattress controls |
